9902.17.51

Used gear boxes for the vehicles of subheading 8701.20 or heading 8704 (provided for in subheading 8708.40.11)

New gear boxes for the vehicles of headings 8702 or 8704, the foregoing gear boxes with six speeds and with peak torque rating of at least 69 kg-m but not greater than 110 kg-m (provided for in subheading 8708.40.11)

Used gear boxes for vehicles of subheadings 8701.30.50, 8701.91, 8701.92, 8701.93, 8701.94 and 8701.95 (provided for in subheading 8708.40.50)

Differentials for vehicles of heading 8703, each incorporating a self-contained silicone-fluid filled reservoir, shear pump and progressively-locking clutch pack, the foregoing other than for tractors (except road tractors) (provided for in subheading 8708.50.89)

Suspension system stabilizer bars of alloy steel, weighing not more than 40 kg, designed for use in Class 7 and Class 8 heavy duty trucks only (provided for in subheading 8708.80.65)

Mufflers and exhaust pipes for motor vehicles of headings 8701 to 8705 (other than for tractors suitable for agricultural use) (provided for in subheading 8708.92.50) and parts thereof (provided for in subheading 8708.92.75)

Bicycles each with no seat, no seat tube and no seat stay, designed to be pedaled by a user in a standing position only, such bicycles having both wheels not exceeding 63.5 cm in diameter (provided for in subheading 8712.00.15).

Cycles, each either with two wheels and having both wheels not exceeding 63.5 cm in diameter, or with three wheels; all the foregoing propelled by laterally mounted pedals designed to be pushed in an alternative elliptical step motion (provided for in subheading 8712.00.50)

Unicycles (provided for in 8712.00.50)

Disc brakes designed for bicycles, and parts thereof (provided for in 8714.94.90)

"Z"-shaped water bottle holders (cages) of alloy or composite material, designed for use on bicycles (provided for in 8714.99.80)

Wide angle reflectors, designed for use on bicycles (provided for in 8714.99.80)

One-piece baby strollers, each with non-detachable seat; with foldable, non-removable anchor points designed for car seat mounting and a folding mechanism designed to allow the backrest to collapse forward against the stroller seat (provided for in heading 8715.00.00)

Baby strollers, each with chassis presented with removable seat and removable bassinet, with the seat designed to be attached to the chassis base plate, with the seat backrest designed to allow a child to be in a reclining position or to be supported at varying backrest angles; the foregoing not including any such stroller with a tilting or tilted seat only (provided for in heading 8715.00.00)

Projection lenses, each with focal length of 1.13 m or more but not over 36.94 m and a throw ratio of 0.66 m or more but not over 9.23 m, the foregoing not exceeding 8 kg in weight (provided for in subheading 9002.11.40)

Projection lenses, each with focal length of 19.68 mm or more but not over 132.0 mm, throw ratio of 0.28:1 or more but not over 7.10:1 and focus range optical 0.45 m or more but not over 40 m, the foregoing not exceeding 5.4 kg in weight (provided for in subheading 9002.11.40)

Swim goggles, protective, with silicone head straps (provided for in subheading 9004.90.00)

Projection screens, each measuring 11 m or more but not over 22 m in width, of acoustically transparent perforated material (provided for in subheading 9010.60.00)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring not over 58.42 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 58.42 cm but not over 78.74 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 78.74 cm but not over 81.28 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 81.28 cm but not over 99.06 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 99.06 cm but not over 101.6 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 101.6 cm but not over 124.46 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 124.46 cm but not over 137.16 cm (provided for in subheading 9013.80.90)

Liquid crystal display (LCD) television panel assemblies, each with a video display diagonal measuring over 137.16 cm (provided for in subheading 9013.80.90)

Optical attenuators designed to reduce the power level of an optical signal, either in free space or in an optical fiber, such instruments or apparatus specifically designed for telecommunications (provided for in subheading 9013.80.90).

Bicycle speedometers (provided for in 9029.20.20)

Oscilloscopes and oscillographs, having a bandwidth range of 20 GHz to 90 GHz and a sampling rate range of 50 megabytes per second (50 Mbps) to 80 gigabytes per second (80 Gbps), each with 1 to 16 measurement channels, internal hard drive, 1 to 4 interchangeable measurement modules and a color touch screen measuring over 25 cm but not over 28 cm (provided for in subheading 9030.20.10), the foregoing other than hand-held

Hand-held oscilloscopes (provided for in subheading 9030.20.10)

Multimeters, each without recording device, not intended to be hand-held, having either 4-1/2, 5-1/2, 6-1/2, 7-1/2 or 8-1/2 digits of measurement accuracy, with or without LXI (LAN extension for instruments) standard and with either a color or non-color single or dual display screen (provided for in subheading 9030.31.00).

True RMS (root mean square) multimeters, without recording device, hand-held, each having either 3-1/2, 4 or 4-1/2 digits of measurement accuracy and either a liquid crystal display (LCD) or organic light emitting diode (OLED) display screen, designed to provide one or more of the following measurements: DCV, ACV, DCI, ACI, 2 and/or 4 wire resistance, frequency, continuity, diode test, capacitance, temperature, dB, switch counter, harmonic ratio, pulse width, delay cycle and/or 4 to 20 mA percent scale (provided for in subheading 9030.31.00).

PXI 6-1/2 digit digital multimeters (DMM), each without recording device, not intended to be hand-held, having 6-1/2 digit of measurement accuracy, designed to provide basic measurements that may include DCV, ACV, DCI, ACI, 2 and 4 wire resistance, frequency, period, capacitance, temperature, duty cycle, counter and DC source (provided for in subheading 9030.31.00)

Digital multimeters, each having 8.5 digit resolution and having a recording device, certified by the importer as having 3 ppm direct current volts (DCV) accuracy (provided for in subheading 9030.32.00)

Impedance analyzers, having a frequency range of 20 Hz to 120 MHz and plus or minus 42 V peak maximum output, each with 1 to 4 measurement channels, a recording device and a color touch screen measuring over 25 cm but not over 28 cm (provided for in subheading 9030.84.00).

Electromagnetic interference (EMI) receivers, each having a frequency band range from 3 Hz to 44 GHz, conforming to LXI (Local area network eXtension for Instruments) standard, with two radio frequency (RF) inputs and with a color display screen with a display diagonal exceeding 20 cm but not exceeding 23 cm (provided for in subheading 9030.84.00).

Multifunction devices for calibrating electrical safety testers, each incorporating signal generator and multimeter, with a recording device (provided for in subheading 9030.84.00)

Local area network (LAN) eXtensions for Instrumentation (LXI) data acquisition/switch units, each having both a universal serial bus (USB) and LAN terminal using the LXI standard, having a 3-slot mainframe in rear for plug-in modules, capable of measuring 11 different input signals and having a built-in digital multimeter (DMM) with 6-1/2 digits (22 bits) of resolution (provided for in subheading 9030.89.01).

Signal generators, certified by the importer to be used for calibrating oscilloscopes, the foregoing each with five channels and no recording device (provided for in subheading 9030.89.01)

Signal generators, certified by the importer to be used for calibrating radio frequency measurement equipment, each presented without a recording device (provided for in subheading 9030.89.01)

Output-only signal generators, each with configurable phases and harmonics designed for calibrating power and energy equipment, the foregoing without a recording device (provided for in subheading 9030.89.01).

Battery-operated chiming melody clock movements, complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9109.10.80)

Mechanical clock movements, presented complete and assembled, valued over $5 each, suitable for use in the production of grandfather clocks, wall clocks or mantel clocks (provided for in subheading 9109.90.60)

Chime melody rod assemblies and parts thereof, the foregoing suitable for use in the production of grandfather clocks, wall clocks and mantel clocks (provided for in subheading 9114.90.50)

Pillows, cushions and similar furnishings of cotton, each measuring over 4,000 cm² (provided for in subheading 9404.90.10)

Pillows, cushions and similar furnishings, the foregoing of materials other than cotton, each measuring over 4,000 cm² (provided for in subheading 9404.90.20)

Electric light emitting diode (LED) lighting fittings, of base metal other than of brass, whether ceiling (hanging) or wall mounted, each with LED light source concealed above a quartz cylinder and designed to create a total internal reflection (provided for in subheading 9405.10.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with interchangeable mounting options including bases, clamps or other mounts (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with ball joints to allow multiple positions of the lamp head relative to the base (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each incorporating a reflector designed to reflect light from the LED in the stem of the lamp (provided for in subheading 9405.20.60)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)

Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60)

Clear or frosted columnar globes or shades, certified by the importer as of extruded borosilicate glass; the foregoing measuring 2.54 cm or more but not over 30.48 cm in length and 2.54 cm or more but not over 20.32 cm in diameter, each with circular openings at the top and bottom, designed for use on portable non-electrical lanterns for outdoor use (provided for in subheading 9405.91.40)

Ski bindings (other than for cross-country skis), valued not over $55 each (provided for in subheading 9506.12.80)

Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft of 9.5 degrees (provided for in subheading 9506.39.00)

Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft over 9.5 degrees (provided for in subheading 9506.39.00)

Golf club driver heads, each stamped or otherwise permanently marked to indicate a loft under 9.5 degrees (provided for in subheading 9506.39.00)

Golf club heads designed for clubs designated as 1-irons, 2-irons, 3-irons, 4-irons or 5-irons (provided for in subheading 9506.39.00)

Golf club hybrid heads, each stamped or otherwise permanently marked as such (provided for in subheading 9506.39.00)

Golf club wedge heads, each stamped or permanently marked to indicate a loft of 56 degrees or less (provided for in subheading 9506.39.00)

Golf club heads designed for clubs designated as 6-irons and 7-irons (provided for in subheading 9506.39.00)

Golf club heads designed for clubs designated as 8-irons and 9-irons (provided for in subheading 9506.39.00)

Golf club wedge heads, each stamped or otherwise permanently marked to indicate a loft of greater than 56 degrees (provided for in subheading 9506.39.00)

Golf club putter heads (provided for in subheading 9506.39.00)

Tennis rackets, strung and packaged for retail sale (provided for in subheading 9506.51.20)

Lawn-tennis rackets, unstrung (provided for in subheading 9506.51.40)

Racquetball rackets (provided for in subheading 9506.59.80)

Squash rackets (provided for in subheading 9506.59.80)

Inflatable volleyballs (provided for in subheading 9506.62.80)

Inflatable basketballs, each having an external surface other than of leather or of rubber (provided for in subheading 9506.62.80)

Inflatable basketballs with outer surface of leather (provided for in subheading 9506.62.80)

Inflatable basketballs, each with an outer surface of rubber (provided for in subheading 9506.62.80)

Noninflatable hollow racquetballs, not over 19 cm in diameter (provided for in subheading 9506.69.40)

Fitness equipment designed for circuit training, each unit comprising a steel frame and standing platform incorporating six handles attached to cables and pulleys with variable resistance levels, with an electronic control panel capable of the wireless exchange of data and having a multicolored light-emitting diode (LED) grid (provided for in subheading 9506.91.00)

Fitness equipment designed for in-home use, each unit incorporating two independent treadmill decks with separately moving belts that rotate around a mechanical treadle and simultaneously move up and down during use, designed to allow progressive amounts of resistance and combine the functions of a treadmill, a stair climber and an elliptical machine (provided for in subheading 9506.91.00)

Fitness equipment, with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, equipped with an electronic control console incapable of the wireless exchange of data, with non-backlit LCD display and presented with a heart-rate monitor chest strap (provided for in subheading 9506.91.00)

Exercise and yoga mats of synthetic material (provided for in subheading 9506.91.00)

Fitness equipment, with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, equipped with an electronic control console capable of the wireless exchange of data, with backlit LCD display and heart rate monitor (provided for in subheading 9506.91.00)

Speed bags, free standing heavy bags, heavy bag stands of steel, speed bags with inflatable balls and heavy bag shells (provided for in subheading 9506.91.00)

Upright, recumbent and semi-recumbent exercise cycles (provided for in subheading 9506.91.00)

Adjustable-weight fitness dumbbells, each ranging from 2 kg to not more than 30 kg, having the capability for wireless exchange of data, incorporating a rotating single handle grip that interlocks disks with weight plates supported by a fitted plastic base, whether or not presented packaged with units that are not capable of wireless exchange of data (provided for in subheading 9506.91.00).

Adjustable-weight fitness dumbbells without Bluetooth capability, each ranging from 2 kg to not more than 30 kg, certified by the importer as incorporating a rotating single handle grip that interlocks disks with weight plates, supported by a fitted plastic base (provided for in subheading 9506.91.00)

Fitness equipment, each unit with pivoting handles and foot pedals with steel footbeds to allow the user to perform alternating movements (whether or not also with stationary handles), combining the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; with an electronic control console having a backlit liquid crystal display/light-emitting diode (LCD/LED) display and capable of the wireless exchange of data; having an integrated heart rate monitor with optional chest strap (provided for in subheading 9506.91.00)

Adjustable-weight fitness dumbbells, each allowing the user to choose a weight from a range of either 2 kg or more but not over 26 kg or 4 kg or more but not over 46 kg, certified by the importer as incorporating rotating end dials that interlock disks with weight plates supported by a fitted plastic base (provided for in subheading 9506.91.00)

Inflatable tetherballs, each with rope attachment (provided for in subheading 9506.99.60)

Athletic mouth guards of plastics (provided for in subheading 9506.99.60)

Boxing and mixed martial arts protective equipment, including shin guards, pads and shields (provided for in subheading 9506.99.60)

Fishing rods of fiberglass and carbon fiber, one-piece, presented without fishing reels, such rods valued $5 or more but not over $50 each (provided for in subheading 9507.10.00)

Fishing rods, each presented with a fishing reel valued over $2.70 but not more than $8.45 each and containing fishing line, the foregoing put up for retail sale as a complete kit each comprising one rod and one reel (whether or not containing other accessories), with each kit having an aggregate value of no more than $30 (provided for in 9507.30.40)

Hair-slides, set with imitation pearls or imitation gem stones and not of hard rubber or plastics (provided for in subheading 9615.19.60)

Hair-slides, the foregoing not set with imitation pearls or imitation gem stones, not of hard rubber or plastics (provided for in subheading 9615.19.60)

Eyelash curlers (provided for in subheading 9615.90.20)

Insulated coffee servers, each with exterior of stainless steel and vacuum liner of glass and a hinged brew-through lid with push-button dispensing; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)

Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)