9902.16.07

Used fixed ratio speed changers (provided for in subheading 8483.40.50), other than transmissions for the vehicles of headings 8701, 8702, 8703, 8704, and 8705

Flexplates designed for use in compression-ignition engines of a cylinder capacity equal to or greater than 6,000 cc but not exceeding 20,000 cc, such flexplates measuring 5 cm or more but not over 150 cm in length, 22 cm or more but not over 150 cm in width and 2 cm or more but not over 150 cm in height (provided for in subheading 8483.60.80)

Flexplates designed for use in compression ignition engines with cylinder capacity ranging between 1000 cc to 5900 cc, such flexplates measuring 35 cm or more but not over 50 cm in length, 35 cm or more but not over 50 cm in width and 2 cm or more but not over 10 cm in height (provided for in subheading 8483.60.80)

Ring gears, with diameter 30 cm or more but not over 200 cm and height of 6 cm or more but not over 30 cm, the foregoing to be assembled onto the periphery of a flexplate or flywheel for a diesel engine ranging in cylinder capacity equal to or greater than 5,000 cc but not exceeding 95,000 cc (provided for in subheading 8483.90.50)

Electromechanical rotational actuators, each with attached actuator arm and pin (such arm measuring between 12 mm and 15 mm in length and with pin diameter of 8 mm), of an output of 36 W (provided for in subheading 8501.10.60)

Power back door (liftgate) actuator assemblies for the motor vehicles of headings 8701 to 8705, each consisting of a brushless electric DC motor that generates between 350 and 400 W, an electromagnetic clutch, a clutch magnet, a clutch flywheel, a clutch plate, a sensor and a housing (provided for in subheading 8501.31.40)

AC electric motors of an output exceeding 37.5 W but not exceeding 74.6 W, single phase, each equipped with a capacitor, rotary speed control mechanism and a motor mounting cooling ring (provided for in subheading 8501.40.20).

AC electric motors of an output exceeding 37.5w but not exceeding 72w, single phase, each equipped with a capacitor, a speed control mechanism, and a motor mount of plastics and a self-contained gear mechanism for oscillation (provided for in subheading 8501.40.20).

AC electric motors, single-phase, of an output exceeding 50 W but not exceeding 74.6 W, each equipped with a capacitor and a three-speed control switch (provided for in subheading 8501.40.20)

AC electric motors of an output exceeding 74.6 W but not exceeding 95 W, single phase, each equipped with a capacitor and a speed control mechanism (provided for in subheading 8501.40.40)

AC electric motors, single phase, of an output exceeding 74.6 W but not exceeding 95 W, such motors each equipped with a capacitor and a three-speed control switch (provided for in subheading 8501.40.40)

Submersible multi-phase motors designed for use with pumps, such motors cylindrical in shape, each having a diameter exceeding 12 cm but not exceeding 18 cm and a length exceeding 63 cm but not exceeding 80 cm, the foregoing having a power output exceeding 3 kW but not exceeding 14.92 kW (provided for in subheading 8501.52.40)

Submersible multi-phase motors designed for use with pumps, such motors cylindrical in shape, each having a diameter exceeding 22 cm but not exceeding 35 cm and a length exceeding 150 cm but not exceeding 230 cm, the foregoing with a power output exceeding 149.2 kW but not exceeding 150 kW (provided for in subheading 8501.53.60)

AC electric generators, each with a flywheel and an eddy-current loading device, the load being controlled magnetically (provided for in subheading 8501.61.00), designed for use in exercise equipment of subheading 9506.91

Electric generating sets, each with spark-ignition internal combustion piston engine fueled by natural gas (provided for in subheading 8502.20.00)

Stator core and rotor core laminations, imported in pairs each comprising one stator core lamination and one rotor core lamination; with such stator core laminations having an exterior diameter of 26.42 cm and an inner diameter of 20.35 cm, weighing 4.14 kg or more but not over 6.72 kg; such rotor core laminations having an exterior diameter of 20.2 cm and an inner diameter of 14.0 cm, weighing 3.3 kg or more but not over 5.3 kg; the foregoing certified by the importer as designed to be used in the manufacture of generator motors for charging the battery of hybrid vehicles and of electric motors for propulsion of hybrid vehicles (provided for in subheading 8503.00.95)

Power adapters designed for use with standard car cigarette lighter sockets having dual USB output ports with 12 W output per port (provided for in subheading 8504.40.95)

Fuel shutoff solenoids designed for compression-ignition diesel engines with cylinder capacity ranging between 2,000 cc and 20,000 cc, such solenoids measuring 5 cm or more but not over 800 cm in length, 3 cm but not over 500 cm in width and 3 cm but not over 200 cm in height (provided for in subheading 8505.90.75)

Rechargeable lithium batteries, certified by the importer as having a polymer electrolyte layer and composite cathode, designed to complete 800 cumulative battery lifetime hours and operate at sustained temperatures between 45 degrees Celsius and 130 degrees Celsius continuously for a minimum of 1 hour between recharges (provided for in subheading 8507.60.00)

Lithium thionyl chloride (LTC) batteries, annular in shape, measuring 30.48 mm or more but not over 152.4 mm in length, with an outer diameter of 10.16 cm or more but not over 127 mm and an inner diameter of 55.88 mm or more but not over 88.9 mm, certified by the importer as containing a lithium anode and a liquid cathode comprising a porous carbon current collector filled with thionyl chloride (SOCl2) (provided for in subheading 8507.60.00)

Lithium thionyl chloride batteries, cylindrical in shape, measuring 30.48 mm or more but not over 152.4 cm in length, having an outer diameter of 10.16 mm or more but not over 127 mm, each certified by the importer as containing a lithium anode and a liquid cathode comprising a porous carbon current collector filled with thionyl chloride (SOCl2) (provided for in subheading 8507.60.00)

Electromechanical burr coffee grinders, with self-contained electric motor, each presented with one clear glass top storage vessel and one clear glass bottom storage vessel (provided for in subheading 8509.40.00)

Electromechanical domestic appliances, each with self-contained electric motor, such appliances designed for peeling, coring and slicing fruits and vegetables and capable of cutting such food into spiral shapes, the foregoing each having more than five interchangeable cutting blades (provided for in subheading 8509.40.00)

Electromechanical cylindrical coffee grinders, each operated by pushing the plastic cover into the base, the foregoing having a removable stainless steel bowl with a capacity of more than 0.1 liter and not exceeding 0.2 liter (provided for in subheading 8509.40.00).

Electromechanical knives, each with self-contained electric motor, valued $8 or more but not more than $40 each (provided for in subheading 8509.80.50)

Litterboxes, each with self-contained electric motor powered by an external adapter that plugs into a wall socket or electrical outlet and may have batteries for back-up, such devices which rake and/or disperse cat waste into a compartment after a certain amount of time has passed once the mechanism is triggered by cat entering the litterbox; the foregoing designed for domestic use (provided for in subheading 8509.80.50)

Feeders, each with a self-contained electric motor powered by an external adapter that plugs into a wall socket or electrical outlet or uses batteries, such devices which can be programmed to disperse various quantities of food at pre-set times, designed for domestic use by dogs and cats (provided for in subheading 8509.80.50)

Waterers, each with a self-contained electric motor powered through an external adapter that plugs into a wall socket or electrical outlet or uses batteries, such devices which filter a continuously flowing water fountain or replenish water when volume is below a certain fill level, the foregoing designed for domestic use by dogs and cats (provided for in subheading 8509.80.50)

Feeders designed for use with fish, each with a self-contained electric motor powered by batteries, with retaining clips or clamps to attach to a household aquarium, the foregoing which can be programmed to disperse various quantities of food at preset times (provided for in subheading 8509.80.50)

Electromechanical knives, each with self-contained electric motor (provided for in subheading 8509.80.50), the foregoing only if valued either less than $8 or more than $40 each

Hand-held battery-operated automatic can openers, each with self-contained electric motor, such can operners weighing not over 20 kg exclusive of extra interchangeable parts or detachable auxiliary devices (provided for in subheading 8509.80.50)

Stainless steel food beaters, designed for use solely on electromechanical hand-held food mixers suitable for domestic purposes (provided for in subheading 8509.90.55).

Stainless steel dough hooks designed for use solely on electromechanical food hand mixers suitable for domestic purposes (provided for in subheading 8509.90.55)

Electrothermal bowls designed for use with electromechanical stand food mixers of a kind used for domestic purposes, each bowl having a control panel with digital display (provided for in subheading 8509.90.55)

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 4.7 liters but not exceeding 8.6 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and two welded stainless steel side brackets with circular holes (provided for in subheading 8509.90.55)

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)

Used electric starter motors for spark ignition or compression ignition internal combustion engines (provided for in subheading 8511.40.00)

New alternators rated to produce voltage at 24 V and current at 500 A or more, designed to power military diesel engine components and supporting systems, such alternators each weighing less than 55 kg and measuring less than 300 mm in diameter (provided for in subheading 8511.50.00)

Used generators (alternators) of a kind used in conjunction with spark ignition or compression ignition internal combustion engines (provided for in subheading 8511.50.00)

Parts of signaling equipment, each with pressed sealing on the flanges (provided for in subheading 8512.90.20)

Electric heating units designed for permanent ceiling installation, each containing a heater and one or two infrared bulbs, with or without a fan (provided for in subheading 8516.29.00)

Heating units each combining a heater, a fan and a light for residential use, designed for permanent ceiling installation, each containing an adjustable louver mounted in the grille, such louver may be rotated 360 degrees for the flow of heat output to be manually self-positioned (provided for in subheading 8516.29.00)

High-capacity heating units, designed to be permanently mounted into a wall and for use in residential households, each generating 1000 and 1500 W, containing a grille, with or without built-in thermostat (provided for in subheading 8516.29.00)

Electrothermic steam irons of a kind used for domestic purposes, capable of operating without power cord connected to mains, each with detachable base (provided in subheading 8516.40.40)

Electrothermic steam irons of a kind used for domestic purposes, each with a ceramic-coated cast aluminum sole plate (provided for in subheading 8516.40.40), the foregoing not capable of operating without power connected to mains

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing containing a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and with a door having an exterior molded plastic handle (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 48 liters but not exceeding 49 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm and a door with exterior metal handle (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 31 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 30 cm but not exceeding 32 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having an oven capacity of greater than 58 liters but not exceeding 60 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 53 liters but not exceeding 55 liters, the foregoing having a glass turntable plate with a diameter greater than 35 cm but not exceeding 37 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of 56 liters or more but not over 58 liters, having a glass turntable plate with a diameter measuring 30 cm or more but not over 31 cm (provided for in subheading 8516.50.00)

Microwave ovens with integral range hoods, of a kind used for domestic purposes, each having oven capacity of greater than 56 liters but not exceeding 58 liters, the foregoing having a glass rectangular turntable plate (provided for in subheading 8516.50.00)

Electrothermic waffle makers, of a kind used for domestic purposes, with dual-sided plates positioned vertically and deep grids divided into equal quarters in a circular shape mold, with funnel on top; such appliances in stainless steel housing, with a spout including fill mark level and a release to open housing for waffle removal (provided for in subheading 8516.60.60)

Electrothermic multifunction grills of a kind used for domestic purposes, each incorporating a cooking plate for use as a grill, griddle or oven, with removable power cord with a thermostatic control (provided for in subheading 8516.60.60)

Electrothermic dual-grid sandwich grilling appliances of a kind used for domestic purposes, each with a locking latch and floating upper lid (provided for in subheading 8516.60.60), the foregoing without thermostatic control

Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each capable of brewing multiple servings and incorporating a removable water tank with a handle; the foregoing excluding coffee makers with dome-shaped housing or designed for permanent installation into a wall, cabinet or shelf, and excluding coffee makers designed to utilize coffee capsules or pods (provided for in subheading 8516.71.00)

Electrothermic automatic coffee makers of a kind used for domestic purposes, each having a dome-shaped housing over the brewing chamber, the foregoing capable of brewing multiple servings and designed to heat all water in separate heating chamber before releasing heated water into brewing chamber (provided for in subheading 8516.71.00)

Electrothermic siphon coffee brewers of a kind used for domestic purposes, each with upper globe-shaped chamber that seals to bottom carafe magnetically, the foregoing having an electronic control in base (provided for in subheading 8516.71.00)

Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)

Electrothermic coffee machines of a kind used for domestic purposes, designed to brew using coffee capsules, each having a loading lever containing both stainless steel and plastic (provided for in subheading 8516.71.00)

Electrothermic espresso makers of a kind used for domestic purposes, each with hydraulically activated "shower head" spray with automatic tamping and retraction functionality and magnetic locking drawer style filter, the foregoing without bayonet locking tabs (provided for in subheading 8516.71.00)

Automatic drip coffee makers of a kind used for domestic purposes, each with an electronic programmable clock and with a front-access water reservoir and brew basket (provided for in subheading 8516.71.00); the foregoing other than coffee makers with removable water tank or with dome-shaped housing over brewing chamber

Electrothermic automatic drip coffee makers of a kind used for domestic purposes, each with electronic clock and self-contained coffee holding chamber, the foregoing designed to be used without separate carafe (provided for in subheading 8516.71.00); the foregoing excluding coffee makers (i) designed for permanent installation in a wall, cabinet or shelf, (ii) with removable tank with a handle or (iii) with loading lever containing both stainless steel and plastics

Electrothermic automatic coffee makers of a kind used for domestic purposes, each incorporated into a housing for permanent installation into a wall or cabinet or on a shelf and capable of remote operation via wireless connection to a smartphone or tablet (provided for in subheading 8516.71.00)

Electrothermic toaster ovens of a kind used for domestic purposes, each incorporating a single-slot toaster opening on top of the oven (provided for in subheading 8516.72.00)

Electrothermic painted metal dome-shaped kettles, of a kind used for domestic purposes, each with a circular thermometer display and a base containing a temperature control lever and power button (provided for in subheading 8516.79.00)

Electrothermic stainless steel cylindrical kettles, of a kind used for domestic purposes, each with a liquid crystal display and operational control buttons and display on top of the handle and having a translucent capacity indicator behind the handle (provided for in subheading 8516.79.00)

Electrothermic slow cookers of a kind used for domestic purposes with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cooker having five cooking functions (slow cook, brown and saute, steam, bake and roast) controlled by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with a glass lid and removable ceramic cooking pot with a capacity of 5.68 liters, such cookers having three cooking functions (bake, saute and slow cooking) operated by a digital control panel (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic slow cookers of a kind used for domestic purposes, with stainless steel or painted metal exterior, each with one primary removable ceramic cooking pot with a capacity of 3.31 liters and with two removable ceramic cooking pots each having a capacity of 1.42 liters located above the primary unit and attached to swing arms that can move to the left and right of such primary unit, with separate knobs to control temperature of each cooking pot (provided for in subheading 8516.79.00), the foregoing without a thermometer probe or boiling and simmering functions

Electrothermic sandwich cookers of a kind used for domestic purposes, designed to be used with round bread (provided for in subheading 8516.79.00)

Electrothermic multifunctional cookers (multicookers) of a kind used for domestic purposes, each incorporating a timer and designed to prepare foods by various methods, including boiling, simmering, baking, frying, roasting or stewing (provided for in subheading 8516.79.00), the foregoing without a thermometer probe

Electrothermic programmable slow cookers of a kind used for domestic purposes, with thermometer probe (provided for in subheading 8516.79.00), the foregoing without boiling and simmering functions

Electrothermic pressure cookers of a kind used for domestic purposes, with a capacity of not less than 5 liters, rated more than 1000 W but not more than 1200 W (provided for in subheading 8516.79.00)

Electrothermic rice cookers of a kind used for domestic purposes, rated 200 W or less, each with detachable power cord (provided for in subheading 8516.79.00)

Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of not less than 5 liters and rated more than 1200 W but not more than 1400 W (provided for in subheading 8516.79.00)

Electrothermic pressure cookers of a kind used for domestic purposes, each with a capacity of less than 5 liters and rated from 800 W to 1000 W (provided for in subheading 8516.79.00)

Electrothermic hot oil popcorn poppers of a kind used for domestic purposes, each with rotating metal wire stirring sticks and mechanical tumbler action (provided for in subheading 8516.79.00)

Electrothermic plug-mounted room deodorizers of a kind used for domestic purposes, each with decorative non-plastic housing, not incorporating a rheostat; such appliances intended for use with fragrant wax, whether or not presented with wax (provided for in subheading 8516.79.00)

Handheld electrothermic garment steamers of a kind used for domestic purposes, each with body of plastics, with output rated less than 1000 W, with retractable cord and weighing not more than 1 kg, whether or not packaged with a storage bag (provided for in subheading 8516.79.00)

Vacuum insulated coffee carafes, with interior and exterior of stainless steel, each with a capacity over 1 liter but not over 2 liters and plastic brew-through lid for direct brewing (provided for in subheading 8516.90.90)

Vacuum insulated thermal pitchers, each with stainless steel interior and exterior, with a capacity exceeding 1 liter but not exceeding 2 liters, measuring 27.94 cm or more but not over 30.48 cm in height, with plastic brew-through lid for direct brewing and plastic spout and handle for pouring (provided for in subheading 8516.90.90)

Flat panel liquid crystal display (LCD) television reception apparatus, each including a television tuner, designed for incorporation into exercise equipment (provided for in subheading 8528.72.72)

15 Amp ground fault circuit interrupters (provided for in subheading 8536.30.80)

Ground fault circuit interrupters rated at 20 A (provided for in subheading 8536.30.80)

Arc fault circuit interrupters, including dual function arc/ground fault circuit interrupters (provided for in subheading 8536.30.80)

Lamp-holder housings of porcelain, containing sockets (provided for subheading 8536.61.00)

Assemblies each comprising a chassis or shelving of subheading 8517.70 combined with a backplane (panel/distribution board) equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, for a voltage not exceeding 1,000 V (provided for in subheading 8537.10.91)

Printed circuit assemblies suitable for use solely with ground fault circuit interrupters (GFCIs) and arc fault circuit interrupters (AFCIs) of subheading 8536.30.80 (provided for in subheading 8538.90.30)

Ultraviolet lamps filled with deuterium gas, each without radio-frequency identification device and valued over $300 (provided for in subheading 8539.49.00)

Ultraviolet lamps filled with deuterium gas, each with radio-frequency identification device and valued over $300 (provided for in subheading 8539.49.00)

Cathode-ray data/graphic display tubes, color, with a phosphor dot screen pitch smaller than .4mm and with less than 90-degree deflection.(provided for in subheading 8540.40.10)

Position sensors, each designed to emit digital pulses when rotated or moved linearly, consisting of an outer housing with dimensions of approximately 67 mm by 50 mm by 24 mm that contains an electrical connector and a printed circuit assembly, such sensors certified by the importer as designed for use in ground-based observatories (provided for in subheading 8543.70.45)

Electrical cables and cable bundles for a voltage not exceeding 1,000 V, fitted with connectors (provided for in subheading 8544.42.90), the foregoing of a kind used with machines and apparatus for the manufacture or inspection of semiconductor devices of subheading 8486.20.00 or with optical instruments and appliances for inspecting semiconductor wafers of 9031.41.00

Motor chassis fitted with cabs, each consisting of a motor vehicle chassis fitted with only electric motor for propulsion and a cab, with G.V.W. exceeding 5 metric tons but not exceeding 20 metric tons and for the transport of goods (provided for in subheading 8704.90.00)