9902.15.41

Wire cages of iron or steel, each with attached tray of plastics or of steel, such cages with one or two hinged doors for access to inside of cage, the foregoing designed for small pets other than dogs and for use in the home (provided for in subheading 7323.99.90)

Fire escape ladders no taller than 4.3 m when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $19 each (provided for in subheading 7326.90.86)

Fire escape ladders measuring 4.4 m or more but not more than 7.4 m tall when fully extended, tested to support 510.3 kg of weight and designed to be hung from a window measuring 15 cm or more but not over 25 cm; such ladders each composed of window brackets and rungs (stairs) of steel and rope of man-made fibers that connects the rungs to each other and to the window bracket; with slip resistant rungs and stabilizers, the foregoing for residential use, valued not over $34.50 each (provided for in subheading 7326.90.86)

Belts and bandoliers of iron or steel, not coated or plated with precious metal, the foregoing presented with or without buckle (provided for in subheading 7326.90.86)

Side press wringer handles of steel (provided for in subheading 7326.90.86)

Riser joints of iron or steel, designed to connect drilling rigs to subsea riser containment packages, the foregoing certified by the importer as designed for high bending moments and tension at the bottom and top of riser (provided for in subheading 7326.90.86)

Cold-formed profiles of nickel alloys, having the symmetrical cross section of an isosceles triangle, with a total width between 2.9 mm and 3.1 mm and a height between 3.8 mm and 4.3 mm (provided for in subheading 7505.12.50)

Cold-formed wire of nickel-titanium alloy, presented in coils, with round cross section, with a diameter of 0.1778 mm or more but not over 0.6350 mm (provided for in subheading 7505.22.10)

Machined loupe mountings of cast aluminum, with polytetrafluoroethylene coating (provided for in subheading 7616.99.51)

Zinc die-cast interior punches, each with a plastic exterior casing (provided for in subheading 7907.00.60)

Sintered tungsten bars containing 99.95 percent or more by weight of tungsten, in 0.004 mm (4 micron) size, each measuring 49.78 cm to 64.14 cm in length, 19.56 cm to 23.5 cm in width and 3.99 cm to 4.11 cm in thickness (provided for in subheading 8101.94.00)

Gallium, unwrought and in solid form (provided for in subheading 8112.92.10)

Ingots of germanium, unwrought, each weighing 0.5 kg or more but less than 2 kg (provided for in subheading 8112.92.60).

Ingots and monocrystalline crystals of germanium, each classifiable as unwrought goods under the terms of additional U.S. note to section XV of the tariff schedule and containing 99.999 percent by weight of germanium (provided for in subheading 8112.92.60), the foregoing other than ingots of germanium, unwrought, each weighing 0.5 kg or more but less than 2 kg

Secateurs and similar one-handed pruners and shears, each with a gear-driven rotatable handle which provides increased leverage and control to the movement of the blade (provided for in subheading 8201.50.00)

Two-handed pruning and hedge shears, each with blades articulated around a non-circular gear mechanism (provided for in subheading 8201.60.00)

Grass shears, each with steel cutting blades articulated on a swivel head for horizontal trimming and vertical edging (provided for in subheading 8201.90.30)

Tweezers (provided for in subheading 8203.20.20)

Hand tools designed for attaching tags to garments with plastic fasteners, each comprising a steel feed mechanism housed in a plastic body and a replaceable hollow needle through which the fastener is fed, then inserted through the garment material (provided for in subheading 8205.59.55)

Steel bench vises, each weighing less than 9 kg, bolt mounted with a 180 degree swivel base and with reversible jaw faces having a jaw width (opening) measuring between 11 and 12 cm (provided for in subheading 8205.70.00)

Steel bench vises, weighing less than 13.5 kg, bolt mounted with a 180 degree swivel base and reversible jaw faces, having a jaw width (opening) between 13 and 14 cm (provided for in subheading 8205.70.00)

Steel bench vises, each weighing less than 18.75 kg, bolt mounted with a 180 degree swivel base and with reversible jaw faces, having a jaw width (opening) of between 17 and 18 cm (provided for in subheading 8205.70.00)

Rotary rock drill bits, each with cutting part containing by weight over 0.2 percent of chromium, molybdenum or tungsten or over 0.1 percent of vanadium (provided for in subheading 8207.19.30), designed for use with rock drilling and earth boring tools of heading 8430

Rotary or fixed cutter drill bits, each with cutting part of precious or semiprecious stones (natural, synthetic or reconstructed) on a substrate of base metal or metal carbide mounted to a base metal body, the foregoing designed for use with rock drilling and earth boring tools of heading 8430 (provided for in subheading 8207.19.60)

Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, containing a brew-through lid and hole at bottom of server for lever faucet attachment (provided for in subheading 8210.00.00)

Vacuum insulated coffee servers, each with outer layer and liner of steel, with a capacity over 2 liters, with tightly fitted hinged lid with a center hole designed to allow brewed beverages to pass directly into such server with top lever action for dispensing (provided for in subheading 8210.00.00)

Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, with base but no lid and a hole at bottom of server for lever faucet attachment at time of importation (provided for in subheading 8210.00.00)

Scissors, valued over $1.75/dozen, designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)

Scissors, valued over $1.75/dozen, each with stainless steel blades, one small loop handle and one larger loop handle and with an overall length of less than 17 cm, the foregoing other than those scissors designed for use in pet grooming and presented with attached retail labeling or put up for retail sale as goods designed to cut pet hair (provided for in subheading 8213.00.90)

Nail clippers with stainless steel blades,each having one or both blades with rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30).

Nail nippers and clippers and nail files, the foregoing other than nail nippers and clippers with one or both blades having rounded edged cut-outs and designed for use in cutting nails of dogs, cats or other small pets (including birds, rabbits, ferrets, hamsters, guinea pigs or gerbils) (provided for in subheading 8214.20.30)

Manicure and pedicure sets, each set containing clippers, files and similar manicure or pedicure products; the foregoing not in leather containers (provided for in subheading 8214.20.90)

Padlocks of base metal, of cylinder or pin tumbler construction, each measuring over 3.8 cm but not over 6.4 cm in width, not put up for retail sale (provided for in subheading 8301.10.80)

Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30)

Armored safes of welded steel; each weighing 11.8 kg or less, valued $24 or more but not over $36, with digital lock. (provided for in heading 8303.00.00)

Economizers comprising auxiliary plant for use with boilers of heading 8402, with a pressure capacity of 10686.87 kPa, certified by the importer as for use in the pulp and paper industry (provided for in subheading 8404.10.00)

Stationary steam turbines, condensing type, direct drive, suited for use with a generator, having an output of 60 MW or more but not over 120 MW, with a rotational speed more than 3500 RPM (provided for in subheading 8406.81.10)

Steam turbines, multi-stage, condensing type, direct drive, suitable for use with a generator, having an output of 27 MW or more but not over 40 MW, with an operating rotational speed more than 3500 RPM (provided for in subheading 8406.82.10)

Engine blocks, each weighing over 272 kg but not over 317 kg, for compression-ignition internal combustion piston engines (diesel or semi-diesel engines) having a cylinder capacity of approximately 12.4 liters for vehicles of subheading 8701.20 (provided for in subheading 8409.99.91)

High silicon molybdenum exhaust manifolds for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines) with cylinder capacity of 2,300 cc or more but not exceeding 20,000 cc, each manifold measuring at least 80 cm but not exceeding 200 cm in length, at least 10 cm but not over 200 cm in width, and at least 10 cm but not exceeding 200 cm in height (provided for in subheading 8409.99.91)

Connecting rods designed for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines) for vehicles of subheading 8701.20 or heading 8702, 8703, or 8704, each rod measuring at least 20 cm but not exceeding 120 cm in length, at least 10 cm but not exceeding 60 cm in width, and at least 5 cm but not exceeding 90 cm in height (provided for in subheading 8409.99.91)

Cast iron crankcases, suitable for use solely or principally with marine propulsion engines, each crankcase measuring more than 1.1 m in length (provided for in subheading 8409.99.92)

Cast-iron cylinder heads suitable for use solely or principally with marine compression-ignition engines, such parts with cylinder bore over 125 mm and weighing over 32 kg each (provided for in subheading 8409.99.92)

Pistons suitable for use solely or principally with marine propulsion engines, such pistons each having a cast steel crown and aluminum body, weighing 12 kg or more (provided for in subheading 8409.99.92)

Fuel-injection pump assemblies, designed for compression-ignition internal combustion engines with a capacity of 6.4 liters and with output of less than 1000 kW of power (provided for in subheading 8413.30.10), the foregoing other than used goods

Fuel-injection pumps, designed for compression-ignition engines having an output of 1000 kW or greater, each pump weighing 60 kg or more and capable of generating a pressure greater than 1200 bar, such pumps designed for use in a common rail fuel system (provided for in subheading 8413.30.10), the foregoing other than used goods

Used fuel, lubricating or cooling medium pumps designed for internal combustion piston engines (provided for in subheading 8413.30.10 or 8413.30.90)

New fuel pumps for compression-ignition engines, other than fuel-injection pumps, such pumps measuring 2 cm or more but not over 163 cm in length, 2 cm or more but less than 127 cm in width and 2 cm or more but less than 95 cm in height (provided for in subheading 8413.30.90)

High pressure fuel pumps, each incorporating a default open or closed solenoid valve, certified by the importer to be used in regulating the fuel supply into the fuel rail, designed for use in gasoline direct injection (GDI) spark-ignition internal combustion piston engines (provided for in subheading 8413.30.90); the foregoing other than used goods

Vacuum pumps, each having a steel casing and outer shell of plastics to permit cooling; such pumps measuring approximately 22 cm in height and 16 cm in width, having an aperture to connect with a HEPA filter and a power output rating exceeding 850 W but not over 1050 W, valued no more than $24 each (provided for in subheading 8414.10.00)

Exhaust fans for permanent ceiling installation designed to be used in the bathroom, each containing an electric motor with an output wattage not exceeding 125 W, with or without a light, with volume flow between 1.35 m3 and 2.04 m3 per minute and having a sound level greater than 2.2 sones but not exceeding 6.8 sones (provided for in subheading 8414.51.30)

Exhaust fans designed for permanent ceiling installation in bathrooms, each with a self-contained electric DC brush-less motor with an output wattage not exceeding 125 W, with or without a light, such fans having a sound level rating greater than 0.1 sone but not exceeding 1.2 sones (provided for in subheading 8414.51.30)

Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)

Chimney range hoods, island range hoods or under-the-cabinet range hoods, of a kind normally used in the household, designed for permanent installation to a wall or ceiling, each such hood measuring over 121 cm on its maximum horizontal side, presented with or without a blower; the foregoing, if presented without blower, incorporating other ventilating equipment (provided in subheading 8414.80.90)

Pedestal column assemblies comprising parts for oscillating electric fans, presented in the assembled condition, each consisting of upper and lower tubes of steel, with thermoplastic collet (sleeve) covering the connection point of such tubes together with accompanying collet insert and allowing the two tubes to be locked at adjustable intervals (provided for in subheading 8414.90.10)

Plastic grilles (provided for in subheading 8414.90.10), each incorporating a light-emitting diode (LED) light on the exterior perimeter capable of providing continuous light, certified by the importer as designed to be used with exhaust fans for permanent installation and generating 2.83 m3 per minute, such fans of a kind for residential use and described in subheading 8414.51.30

Air conditioning machines, incorporating a refrigerating unit, mounted on wheels or castors, exceeding 17.58 kW per hour (provided for in 8415.82.01)

Air conditioning machines, each incorporating a refrigerating unit, mounted on wheels or castors, rated at less than 3.52 kW per hour (provided for in 8415.82.01)

Self-contained, portable air conditioning machines, not designed to be fixed to a window, wall, ceiling or floor, with cooling capacity rated at 3.52 kW per hour or more but less than 17.58 kW per hour (provided for in subheading 8415.82.01)

Pressure distillation columns, designed to liquefy air and its component gases, the foregoing containing brazed aluminum plate-fin heat exchangers (provided for in subheading 8419.60.10)

Shell and tube oil coolers designed for compression-ignition engines, such coolers measuring 50 cm or more but not over 180 cm in length, 10 cm or more but not over 70 cm in width and 15 cm or more but not over 70 cm in height (provided for in subheading 8419.89.95)

Self-propelled sprinklers for agricultural or horticultural purposes, other than center pivot type (provided for in subheading 8424.82.00)

Flexographic printing machinery, having continuous roll feed, designed for printing on paperboard (whether or not such paperboard is coated), with a printing speed less than 184 m/minute, and a print width of 101 cm or more but less than 280 cm (provided for in subheading 8443.16.00).

Flexographic printing machinery, having continuous roll feed, designed for printing on paperboard (whether or not such paperboard is coated), having a printing speed of 599 m/minute or more but not more than 801 m/minute and a print width of 106 cm or more but not more than 178 cm (provided for in subheading 8443.16.00)

Weaving machines (power looms), shuttleless, rapier type, for weaving fabrics of a width exceeding 30 cm but not exceeding 4.9 m (provided for in subheading 8446.30.50)

Weaving machines (power looms), shuttleless, jet type, for weaving fabrics of a width exceeding 30 cm but not exceeding 4.9 m (provided for in subheading 8446.30.50)

Miter sawing machines, power operated, not numerically controlled, for working metal, with safety cut off switch (provided for in subheading 8461.50.80)

Table saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, each with blade measuring 25.4 cm (provided for in subheading 8465.91.00), such saws excluding (i) tilting arbor table saws, non-laser guided, each with a 25.4 cm blade and of a weight not exceeding 220 kg, and (ii) laser-guided tilting arbor table saws, each with 25.4 cm blade and detachable base with casters, weighing less than 31 kg

Benchtop band saws, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, the foregoing with a cutting depth between 25 and 36 cm, valued under $1,000 each (provided for in subheading 8465.91.00)

Floor standing (stationary) band saws, each with a cutting depth between 25 and 36 cm, valued under $1,000 each (provided for in subheading 8465.91.00)

Tilting arbor table saws, non-laser guided, each with a 25.4 cm blade and of a weight not exceeding 220 kg (provided for in subheading 8465.91.00)

Laser-guided tilting arbor table saws, each with 25.4 cm blade and presented with a detachable base with casters, the foregoing weighing less than 31 kg (provided for in subheading 8465.91.00)

Miter sawing machines, power operated, not numerically controlled, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, with 25.4 cm blade, capable of adjusting bevel of cut, without laser guides (provided for in subheading 8465.91.00)

Drill presses, valued under $1,000 each (provided for in subheading 8465.95.00)

Rotary drill, hammer and chiseling tools with self-contained electric motor (provided for in 8467.21.00), each with pneumatic hammering mechanism that engages with slotted drive drill-bits and an electromechanical mechanism that separates the drive from the internal gearings, with rated amperage that does not exceed 15 A and with triaxial vibration values, measured in accordance with European Norm 60745, that do not exceed 9 m/s2

Machinery for molding, assembling or otherwise forming uncured, unvulcanized rubber (green) tires (provided for in subheading 8477.59.01), the foregoing to be used in production of new pneumatic tires designed in all sizes for motor cars (such tires in subheadings 4011.10.10 and 4011.10.50), buses and trucks (such tires in subheadings 4011.20.10 and 4011.20.50), motorcycles (such tires in subheading 4011.40.00) and agricultural, forestry, construction or industrial vehicles (such tires of subheadings 4011.70.00, 4011.80.10, 4011.80.20, 4011.80.80, 4011.90.10, 4011.90.20, and 4011.90.80)

Electromechanical "hide and seek" toys, designed for use by cats or dogs, each with an electrically powered fast-moving feather wand that changes direction randomly; such wand mechanism positioned in a round enclosure of plastics, designed to allow the wand to shoot out; such toys each containing a carpeted scratching area on top (provided for in subheading 8479.89.94)

Electromechanical pet toys, each with a plastic butterfly attached to a wire cable that revolves around a plastic base when in use, such toy designed to simulate the flying motion of a butterfly (provided for in subheading 8479.89.94)

Vehicle stability control actuator assemblies (provided for in subheading 8479.89.94)

Subsea joinable connection devices rated at 68947.57 kPa, each certified by the importer as having high strength bend resistance and designed to interconnect subsea trees, manifolds and pipeline terminates to route production flow to a flow line (provided for in subheading 8479.89.94)

Electromechanical cat toys, each depicting a bird in a cage, such toy bird of textile materials with magnet inside its body and suspended by a string from the top of a cage comprising plastic ribs; such cage sitting on a base of plastics that contains the electrical components; with cage base having a magnetic coil designed to switch polarity and cause the bird to be in a state of continuous motion (provided for in subheading 8479.89.94)

Electromechanical cat toys, with electrical function supplying power to the moving parts and supporting the mechanical function, each unit comprising an electrical/mechanical "mouse" of plastics enclosed in an approximately 0.61 m diameter textile fabric "pouch," with such "mouse" designed to randomly move around the inside of the pouch (provided for in subheading 8479.89.94)

Optical telescope mirror segment support assemblies, each presented without mirrors (provided for in subheading 8479.89.94)

Segmented compression-type molds designed to be used for molding / forming and curing "green tires" with a rim diameter measuring over 63.5 cm (provided for in subheading 8480.79.90), such tires for off-the-road use

Valve-type fuel injectors, each functional in a common rail fuel system with a pressure greater than 120 Mpa (1200 bar) (provided for in subheading 8481.80.90), the foregoing other than used goods

Dosing module injectors, comprising parts of compression-ignition engine after-combustion treatment systems, measuring 30 cm or more but not over 50 cm in length, 30 cm or more but not over 50 cm in width and 10 cm or more but not over 30 cm in height (provided for in subheading 8481.80.90), such injectors other than used

Used self-operating regulator valves, such valves designed for controlling variables such as temperature, pressure or flow (provided for in subheading 8481.80.90)

Fuel Injectors, other than used, each incorporating a valve and a micro-stamped orifice hole, certified by the importer as designed to deliver fuel to the combustion chamber of a gasoline engine with a pressure not exceeding 120 Mpa (1200 bar) (provided for in subheading 8481.80.90)

Valves, capable of operating at pressures of 68.94 MPa or more (provided for in subheading 8481.80.90), for controlling production flow through a subsea tree, each mounted in a module that can be removed and replaced by a remotely operated underwater vehicle (ROV)

New crankshafts of forged steel designed for use solely or principally with compression-ignition internal combustion piston engines, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more (provided for in subheading 8483.10.30)

Used camshafts and crankshafts, designed for use solely or principally with compression-ignition internal combustion piston engines (other than spark-ignition internal combustion engines) (provided for in subheading 8483.10.30)

New crankshafts designed for use solely or principally with compression-ignition internal combustion piston engines of a cylinder capacity exceeding 19,000 cc, such crankshafts measuring 200 cm or more but not over 900 cm in length, 100 cm or more but not over 200 cm in width and 50 cm or more but not over 200 cm in height (provided for in subheading 8483.10.30), the foregoing except such new crankshafts of forged steel, other than for vehicles of chapter 87, each measuring more than 1.86 m in length and weighing 453 kg or more

Plain shaft sputter bearings without housing (the foregoing other than spherical bearings), each weighing 200 g or more and with journal diameter measuring 117 mm or more (provided for in subheading 8483.30.80)